Shopping cart

Filters

Personal menu

Preferences

24V DC 2.1A 50W Switching Power Supply

5 out of 5 based on 1 reviews | Write a review

$54.15

24V DC 2.1A 50W switching power supply has universal AC input, with short circuit, overload and overvoltage protections, cooling by free air convection. Low price and high quality SMPS power supply suitable for light strips, computers, printers, monitoring system, etc.

SKU: ATO-SMPS-50-24

Qty:

30-day Returns

Free Shipping

Delivery date: 6-12 days

Overview

Features

Universal AC input / Full range AC input
Short circuit, overload and overvoltage protections
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
High reliability, low price and wide range of applications

Specification

Model		ATO-S-50-24
Output	DC Voltage	24V
	Rated Current	2.1A
	Current Range	0 ~ 2.1A
	Rated Power	50.4W
	Ripple & Noise (Max.)(Note 2)	100mVp-p
	Voltage Adjust Range	22.6 ~ 26.4V
	Voltage Tolerance (Note 3)	±1.0%
	Line Regulation	±0.5%
	Load Regulation	±0.5%
	Setup, Rise, Holdup Time	200ms, 100ms, 30ms
Input	Voltage Range	85 ~ 132VAC/170V~260VAC (selected by a switch) or 240 ~ 370V DC
	Frequency Range	47~63Hz
	Efficiency (Typ.)	82%
	AC Current (Typ.)	1.3A/115V AC 0.65A/230V AC
	Inrush Current (Typ.)	Cold start: 18A/115V AC 36A/230V AC
	Leakage Current	<1mA/240V AC
Protection	Overload	105~150% rated output power Protection type: Hiccup mode, recovers automatically after fault condition is removed.
Environment	Working Temperature	-10 ~ +60℃
	Working Humidity	20~90% RH non-condensing
	Storage Temperature	-20~+85℃
	Storage Humidity	10~95% RH non-condensing
	Temperature Coefficient	±0.03%/℃ (0~50℃)
	Vibration	10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes
Safety & EMC (Note 4)	Safety Standards	UL1012 Approved
	Withstand Voltage	I/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC
	Isolation Resistance	I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC/25℃/70% RH
	EMC Emission	Compliance to FCC Part 15 Jconduction Class B
Others	MTBF	≥408.3K hrs MIN. MIL-HDBK-217F (25℃)
	Dimension	1599738mm (LWH)
	Weight	0.51kg
Note	1. All parameters NOT specially mentioned are measured at 230V AC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance includes set up tolerance, line regulation and load regulation. 4. The switching power supply is considered a component which will be installed into final equipment. Please make sure that the final equipment still meets EMC directives.

Dimension (Unit: mm)

Details

SMPS Power Supply Applications

Power Tools
Electric Saw, Drilling Machine, Ginder, Sand Blast Machine, Puching Machine, Weeding Machine, Air Compressor, etc.
Offices Devices
Computer, Printer, LCD Monitor, Scanning Machine, etc.
Electrics & Household Appliance
TV, VCRS, Radio, Dust Collector, Fan Lamp or LED Strip, Sewing Machine, Microwave Oven, Fridge/Freezr, Coffemarker, etc.
Industrial Equipemnt
Monitoring Equipment, Shipping, Vehicle, Metalhalide Lamp, Solar System, Wind Power Generation, etc.

Tips: Switching power supply development

The development of switching power supply is high-frequency, high reliability, low consumption, low noise, anti-interference and modularity. The performance of switching power supply in light weight, small size and thickness depends on its high frequency. Upgrading of secondary rectification devices and innovation of power ferrites have improved its magnetic performance in high frequency and field density conditions. In addition, miniaturization of capacitors also serves as a key technology. Extensive use of SMT technology accelerated development of switching power supply. To ensure outstanding performance of witching power supply in weight, size and thickness, electric components are laid out on both sides of the circuit. High frequency of switching power supply requires innovation of PWM. As a result, ZVS and ZCS have been applied to switching power supply as supporting technologies to improve its efficiency.

Existing reviews of 24V DC 2.1A 50W Switching Power Supply

Cool little switching power supply

After power test, the voltage is stable, I am running a 3D printer from it and it has no problems. The supply gets warm but not too hot. It uses passive cooling (no fan). Good terminal strip with cover, came with a minor bent corner but otherwise ok.

From: Turner | Date: 22/11/2018

Was this review helpful? Yes No (0/0)

Load more reviews...

Write your review for 24V DC 2.1A 50W Switching Power Supply

Only registered users can write reviews

Review title:

Review text:

Rating:

Bad
Excellent

Customers who bought this item also bought

5 Digit Display Controller for Load Cells

$210.80

SKU: ATO-DPM-LC5D

Digital panel meter can cooperate with load cells, force sensors and weighing sensors, two outputs for data comparison, digital panel meter can display gross, net, peak and valley value alternately.

Digital Load Cell Amplifier, Output 4-20mA/0-10V/RS485

$109.85

SKU: ATO-LCTR-OAR

High precision load cell amplifier has a 6 digit LED display, output signal 4-20mA/ 0-5V/ 0-10V/ RS485. There are 3 keys for parameter settings. Digital load cell amplifier can be calibrated on-line by its 3 keys. The setting parameters include zero, capacity, communication rate, division value, decimal digits, etc.

Load Cell Transmitter, Output 0-5V/0-10V/4-20mA

$81.27

SKU: ATO-LCTR-OA

Load cell transmitter is made of aluminum alloy, output standard signal 0-5V/0-10V/4-20mA, has linear compensation, humidity compensation, external zero debugging, external span debugging, input overload protection and output short circuit protection functions.

Tension and Compression Load Cell, 100kg/2 ton to 20 ton

$104.29

SKU: ATO-LC-S05

Tension and compression load cell can bear both tension and pressure, with good output symmetry, high eccentric load resistant, compact structure and complete specifications. Strain gauge load cell can be applied for batching scale, crane scales and other special weighing instruments.

Through Beam Photoelectric Sensor

$18.99

SKU: ATO-PHOS-TB

Through beam photoelectric sensor consists of a light projector and a light receiver, both of which are separated in structure. The supply voltage is DC 12V-24V or AC 110V-220V. Infrared photoelectric sensor can distinguish the opaque reflective object, with long effective detection distance 5/15/50m, less susceptible to interference, long life, and high reliability.