50A DC Arc Plasma Cutter, Dual Voltage 110V/220V

5 out of 5 based on 1 reviews | Write a review

$857.98

Plasma cutter price is cheap, 50A digital DC plasma cutter miller can run on voltage 110V/220V, 50Hz/60Hz, automatic dual frequency, it has high cutting speed, smooth cutting or welding, power efficiency and low noise output.

Input Voltage (V) *

SKU: ATO-WM-LTP5000D

Qty:

30-day Returns

Free Shipping

Delivery date: 6-12 days

Overview

Dual voltage arc welder output current with 10-50A, suitable for welding stainless steel, mild steel, aluminum and other metal material, ATO welding supplies manufacturer direct sales.

Specifications

Model	ATO-WM-LTP5000D
Output Power	DC
Input Voltage	110V/220V, +/15%, 1-PH, 50Hz/60Hz (Automatic dual frequency)
Input Current	240V, 1-PH, 20A
Output Current	10-50A
Power	7.1 kVA
Power Factor	0.73
Duty Cycle at 40℃ (104℉)	60% at 50A, 240V
Dimension	381mm152.4mm340.8mm
Weight	11.8kg
Cutting Material	Mild Steel, Stainless Steel, Aluminum, etc
Welding Thickness	1/2"
Gas Supply	Clean, Dry, Oil-Free Argon
Color	Red
Warranty	12 Months
Input Power Cable Length	6' (1.8m)
Max Severance Thickness	3/4"
Recommender Gas Inflet Flow Rate/Pressure	3.6scfm at 65psi
Accessories	Pilot Arc Plasma Torch ( 9’5")
	Plasma Consumables (installed on the torch head)
	Air Filter/Regulator
	Ground Clamp&Cable
	Connections, (like air house etc.)
	User Manual

Cut Chart

Material	Thickness		Current
Material	inches	mm	amps
Mild Steel	10 gauge	3	50
	1/4	6	50
	3/8	10	50
	1/2	12	50
	5/8	16	50
Stalinless Steel	10 gauge	3	50
	1/4	6	50
	3/8	10	50
	1/2	12	50
Aluminum	1/8	3	50
	1/4	6	50
	3/8	10	50
	1/2	12	50

Features:
1. 10-50 Amp AC/DC square-wave inverter TIG/Stick (MMA) welder.
2. Automatic dual voltage/ dual frequency (110/220Volt 50/60Hz).
3. High frequency start hand torch control and precise foot pedal welding heat control.
4. Suitable for welding stainless steel, mild steel, aluminum and other metal materials.

Accessories

Structure

Tips: What is The Difference Between AC Welding Machine and DC Welding Machine?
The output current is used to distinguish AC and DC. The more important weldments (such as boilers, pressure vessels and alloy structural steels) generally use DC welding machine, which has beautiful weld formation, stable arc, small splash, low air consumption, and general welding. The DC welding machine for alkaline welding rods has good crack resistance and mechanical properties, but the process performance is poor. The AC welding machine mainly welds low carbon steel and low strength low alloy structural steel. Generally, it is welded by welding acid electrode. The acid electrode can be used for both AC and DC, and the welding process performance is good, but the mechanical properties of the weld, especially the impact toughness is poor. The price of the DC welder equipment is slightly higher than that of the AC welder, and the durability is slightly poor and the maintenance cost is high.

Existing reviews of 50A DC Arc Plasma Cutter, Dual Voltage 110V/220V

My first plasma cutting machine

I choose 50A plasma cutting machine already has a period of time, constantly compare performance, various aspects information, I finally bought a week ago ATO arc plasma cutting machine, I don't like to buy too expensive electric welding machine, the price I can accept, simple to use, beautiful appearance, which surprised me, I probably can be received by a week's time. Of course, I will continue to study further, whether longevity is not guaranteed, this is a new plasma cutting machine, I hope my words can be a reference for those who are hesitant.

From: Hanson | Date: 23/07/2019

Was this review helpful? Yes No (0/0)

Load more reviews...

Write your review for 50A DC Arc Plasma Cutter, Dual Voltage 110V/220V