50 kVA Single Phase Automatic Voltage Stabilizer

5 out of 5 based on 1 reviews | Write a review

$3,855.48

1-phase voltage stabilizer is 50 kVA capacity, automatic stabilize input voltage range 95-125V/ 190-250V AC to 110V±3%/ 220V±3% output. It has excellent features, such as small waveform distortion, high efficiency, high power factor, free from the effect or frequency variation of supply.

Phase *
Output Voltage *
Output Voltage (AC) *

SKU: ATO-AVS-1P50K

Qty:

30-day Returns

Delivery date: 10-20 days

Overview

50 kVA Single Phase Fully Automatic Voltage Stabilizer consists of a contact voltage regulator, electric servo motor and auto-control circuit as well. The auto-sampling circuit sends out a signal to run the servo motor and adjust the position of the carbon brush, it will ensure output voltage steady operations.

Features

Wide input voltage: 95-125V/ 190-250V AC or customize
The high accuracy of the output voltage: 110V±3%/ 220V±3%, other voltages can be customized
High technology: Programmed control computerized
Perfect protection function: Over/low voltage protection, over-heat/load protection, short circuit protection
Fashion design: LCD display that can show all protection functions i.e. input voltage, output voltage, temperature, loading, fault indication, and so on.

Specifications

Product Name	Automatic Voltage Stabilizer
Model Number	ATO-TND/JSW-50kVA
Capacity	50 kVA (The power capacity of the voltage stabilizer needs to be 1.5~2 times greater than the load power)
Phase	Single Phase
Input Voltage Range	±15% tolerance of output voltage
Output Voltage*	220V±3%/ 230V±3%/ 240V±3%/ 110V±3% (Optional)
Adjust Time	<1sec. (Against 10% input voltage deviation)
Frequency	50Hz/60Hz
Current Type	AC
Protection Overvoltage	<246±4V
Temperature Rise	<60°C
Ambient Temperature	-10°C~+40°C
Insulation Resistance	≥5MΩ
Temperature Protection	110℃±10℃
Relative Humidity	<95%
Wave Form Distortion	No additional waveform distortion
Load Power Factor	0.8
Efficiency	≥90%
Display	LCD
Protection Grade	IP20
Dielectric Strength	1500V/min
Certification	CE
Warranty Period	12 months
Weight	175 Kg
Size	6304301020mm
Note: The provided 50 kVA voltage stabilizer is 1-phase (L, N, G) by Europe standard. We can customize the split phase (L1, L2 + G) like the USA standard, just confirm with us by email after ordering.

Details

6 tips for using an AC voltage stabilizer

Because of the complexity of the urban power supply environment and high power load, in order to make the power supply system operate normally no matter when the power consumption is low or high. AC voltage stabilizer plays a good role in the stability.

In real life, many people do not understand the precautions in the use of the voltage stabilizer. Here is a brief description:

The AC voltage stabilizer should avoid violent shaking in use.
In order to maintain its normal operation, the AC voltage stabilizer should be equipped with enough capacity of connecting wires.
In order to ensure the safety of the AC voltage stabilizer in use, the grounding wire cannot be removed.
The AC voltage stabilizer should be maintained regularly. The output accuracy of the AC voltage stabilizer will be affected by dust accumulation.
In the process of using the voltage stabilizer, if an abnormal operation is found, the power supply shall be cut off immediately to check the cause.
When debugging the AC voltage stabilizer, the load should be increased gradually and observed closely to avoid overload during the test.

Existing reviews of 50 kVA Single Phase Automatic Voltage Stabilizer

Items provided by 50kVA single phase automatic voltage stabilizer

Can you proivde 50kVA single phase automatic voltage stabilizier with internal isolation transformer, to set up the voltage and stabilize as well?

From: Nchottie | Date: 30/05/2021

Was this review helpful? Yes No (0/0)

ATO Responded

Yes, we can proivide.

Write your review for 50 kVA Single Phase Automatic Voltage Stabilizer