Desktop Electrical Conductivity Meter, 200mS/cm, DC 9V

Desktop electrical conductivity meter equipped with IP54 for dust and water resistance, the LCD screen displays ultra-high definition conductivity constant and data stability indicators and it can continuously read and balancedly read.

Specification:

Tips: How to operate desktop electrical conductivity meter

1. Start up: Install conductivity electrodes and temperature electrodes on the electrode frame, and clean the electrodes with distilled water.
2. Connect the power cord, turn on the instrument switch, and the instrument will enter the measurement mode. After preheating for 30 minutes, the measurement can be carried out. Set parameters and press the "conductivity/pyroelectric" button to switch the conductivity and pyroelectric coefficient. Set the current temperature value by pressing the "temperature" button (no temperature value is set when inserting the temperature electrode, the current temperature is measured by the temperature electrode).
3. Press the "Electrode Constant" and "Constant Adjustment" keys to set the electrode constant. Press the "Conductivity/TDS" button to enter the conductivity or measurement state for TDS or conductivity measurement
4. Clean the electrode head with distilled water, and then rinse it once with the test solution. Immerse the temperature electrode and conductive electrode into the solution. Stir the solution with a glass rod to make it uniform. Read the conductivity or TDS value on the display screen.
5. After measurement, discard the sample, clean the electrode, drain the water on the electrode tip with filter paper, and place a protective cover containing KCl solution on the electrode

Note: Desktop electrical conductivity meter has been calibrated before delivery, and can be used directly.