1 inch brass ball valve with handwheel for sale at low price, DN25, 1.6MPa, double acting. This fixed forged brass ball valve can be used to control water, oil, non-corrosive and non-combustible gas, etc.
Buy online an efficient drum coupling with a nominal torque of 10,000 Nm and a permissible speed of 4,500 rpm, featuring compact construction, a small radius of rotation, high load carrying capacity, and high transmission efficiency. ATO drum gear couplings are easy to maintain and repair, allowing your machines to run smoothly and efficiently.
Industrial favorable price electric actuated wafer style butterfly valve, comes with double acting electric actuator, optional 110V AC, 220V AC, 380V AC, 24V DC power supply. Electrically operated butterfly valve can control water, air, gas, oil and other liquid at -10 °C to 120 °C working temperature, with 12 inch (DN300) port size, cast iron body, stainless steel disc, EPDM seat.
Large diameter 12 inch pneumatic actuated wafer type butterfly valve for sale at factory price, 300mm (DN300) threaded port, equipped with double acting pneumatic actuator. Industrial air operated butterfly valve has cast iron body, EPDM seat and stainless steel disc, working pressure PN16, working temp -10 °C to 120 °C, high performance and reliable.
Lower cost worm gearbox has variety of reduction ratio to choose: 5:1, 7.5:1, 10:1, 50:1, 60:1, 80:1, 100:1 and so on. It’s new NMRV reducer with 130mm center distance, 3000W rated power and 334 N.m rated torque. 1100W-7500W asynchronous motor, flange and output shaft can be customized and used together.
Sell discount double acting 2 jaw cylinder, repeat accuracy ±0.01mm, long stroke, more than 2 times the stroke of standard cylinder, suitable for work under external force such as press fitting.
Double acting pneumatic gripper cylinder for sale, 3 finger type, double acting, rotary actuated, bore 40mm, stroke 16mm, highly accurate and repeatable smooth drive for end-of-arm (end-effector) or pick-and-place applications.
Good price globe valve flange type with 3/4 inch for sale. Yoke integral with bonnet, available with gear operator. Flanged globe valve is suitable for water, oil and steam medium. Working temperature of globe control valve between -29 ℃ and 425 ℃.
Buy air pressure regulator with affordable price, pressure regulating range 50~9000 mbar (130.5 psi), max flow 1500L/min, working voltage DC 24V, optional input signal current 4~20mA or voltage DC 0~10V, analog/switch output, connection hose port 3/8 inch. Electronic air pressure regulator valve in proportional adjustment, ideal for pneumatic control system.
Pneumatic gripper cylinder with four finger, double acting, the wedge cam construction reduces overall size while maintaining high clamping force, making it ideal for positioning square workpieces and picking up round objects.
Low cost 4 inch ball valve with electric actuator for sale, threaded type, flanged type, and PVC true union type available. Industry electric actuated ball valve with 2 way or 3 way for air, water, liquid and other flow control, DN100 port, PTFE seat, selectable 110V AC, 220V AC, 380V AC, and 24V DC power supply.
Pneumatic angle seat valve adopts single acting pneumatic actuator with spring safety protection to operate, 4 inch thread port, 2 way 2 position. This angle seat piston valve can control air, water, oil, gas and steam, stainless steel body material, nominal pressure 1.6MPa, air pressure 0.4~0.8MPa.
The 4 inch ball valve has an internal diameter size of DN100 and a double joint design which allows easy removal and replacement of the valve without disrupting the entire piping system. PVC true union ball valve is widely used in swimming pools, aquariums, spas for plumbing or for irrigation and other commercial plumbing applications.
Linear slide works with 400W servo motor. Stroke 100mm~3050mm for selection, max speed 2000mm/s, belt width 30mm, lead range 40mm, max payload 45kg, rated thrust 204N. Linear guide rail driven by belt, matching motor and sensor are optional.
High precision pneumatic 2 finger angular grippers are available in a wide range of sizes and configurations with optional bores such as 6mm, 10mm, 16mm, 20mm, 25mm and 32mm. Equipped with a double acting cylinder for control, this featured device has the ability to grip a variety of workpieces and its gripping force is adjustable.
Flanged type pneumatic actuated ball valve for sale at factory price, it comes with 8 inch fluid port and 1/4 or 3/8 inch air supply port, stainless steel body material, high performance PTFE plastic seat, optional 2 way or 3 way. Industrial air powered ball valve is widely used for water, gas, oxygen and other air and fluid control.
Air hose quick connector has 03/04/06 mm input cannula diameters for selection. M-type hose connects are designed for water and air. Well sealed quick connect fitting can be connected to hoses in seconds without any tools, suitable for various watering devices such as nozzle, sprayers, sprinklers.
ATO pneumatic valve actuator for opening and closing butterfly or ball valve, double acting, powered by compressed air, air supply port 1/4 inch, bore size 145mm, air pressure 2.5bar ~ 8bar, aluminum alloy material. Low price, small size, light weight, easy to install and operate.
Tie rod hydraulic cylinder with 18 inch (450mm) stroke, is a robust and essential component in hydraulic systems, designed for linear force and motion applications, optional bore diameters of 32mm, 40mm, 50mm, 63mm, 80mm and 100mm, push fore from 1 ton to 5.5 ton. Low price tie rod cylinder is a reliable choice in construction, agriculture, and manufacturing.
24 inch (600mm) stroke double acting welded hydralic cylinder is avaliable in bore diameters of 40mm, 50mm, 63mm, 80mm and 100mm, load capacity 2/ 3/ 5/ 8/ 12 ton. This welded clevis hydraulic cylinder operates in both directions, providing precise control over the extension and retraction of a piston rod.