Cost-effective universal joint coupling with bore 150mm, flexibility is 80mm, nominal torque 5Nm. The structure of the universal coupling has a large angular compensation capability, compact structure, and high transmission efficiency.
A universal coupling is a linkage or joint between two shafts. The 180mm universal joint coupling features a flexibility of 100mm, nominal torque of 12.5 Nm, fatigue torque of 6.3 Nm. ATO universal joint coupling has high precision and durability.
Reliable universal joint coupling with bore 225mm online for sale. Comes with a flexibility of 140mm, nominal torque 40Nm, and an axis chamfer from 0-25°. The universal coupling is used to connect the two shafts together, and the two shafts cannot be separated when the machine is running.
High-efficiency universal joint shaft coupling with a bore of 250mm, and flexibility of 140mm, nominal torque of 63 Nm, fatigue torque of 31.5 Nm. The universal coupling enables the continuous rotation of the coupled shafts at an angle, allowing for the reliable transmission of torque and motion.
High-efficiency universal joint shaft coupling with a bore of 285mm, and flexibility of 140mm, axis chamfer from 0-25°. The structure of the universal coupling is reasonable, the transmission is stable and the noise is low.
Web tension controller for sale, LCD display, high precision, multi-function, full digital intelligent automatic tension control, send 0-24VDC control voltage command for magnetic powder clutch/brake. It can also output 0-10V voltage signal to control vfd, servo motor or other actuators to perform high-precision tension control on the coil material.
1" (DN25) fully automatic water control valve for sale online. This float control valve provides 304 stainless steel body, PP material float, and threaded connection. Water inlet direction and bracket installation are optional.
Factory price 1 inch pneumatic ball valve for sale, 2 way or 3 way, equipped with high performance double acting pneumatic actuator, DN25 (25mm) port size, threaded type, flanged type and PVC true union type available. This air actuated ball valve is perfect for water, gas control and other fluid service.
Buy a 1/2 inch double union PVC ball valve online, inner diameter size DN15, outer diameter size 20mm. The true union PVC ball valve is widely used in industrial water treatment, chemical industry, environmental protection engineering, electroplating, circuitry, printing, food, paper and other industries.
1/2" (DN15) steam trap for sale online. Low price flanged thermodynamic steam trap with strainer and trap, suitable for steam system applications including process heating, steam tracing, and heating of tanks and vessels.
Good price stainless steel needle valve has 304ss/ 316ss for selection. The 2-way needle valve has an optional thread of G1/4"/ 1/4"NPT, a connection thread size of DN8, and a nominal pressure is 41 MPa. This compact stainless needle valve can be used as a reliable shut-off valve, or to accurately control (relatively low) flow rates of clean gases or fluids.
The 1/4" 1pc pneumatic filter is used to separate condensed moisture and oil in the compressed air and other impurities, so that the compressed air can be purified initially. the general working pressure is 1 MPa -1.5 MPa. High performance filter with cheap price.
1/4 inch FRL filter regulator lubricator combo for sale at economical price, optional PT, G, NPT thread type. This water trap combination unit with pressure gauge and moisture trap can deliver compressed air in pneumatic system.
250mm check valve, CPVC material, is used to control the flow of fluid in the pipeline. It is a 10 inch swing check valve with high temperature, chemical and corrosion resistance, ideal for chemical processing plants, water treatment facilities and other applications where there is frequent exposure to chemicals.
Low cost linear slide guide rail for sale, driven by Ф16mm ball screw. 11 strokes for selection, minimum 100mm, maximum 1050mm, maximum speed 900mm/s, motor capacity 200W, screw path 5/10/20mm. Compact linear motion system can match with servo motor and sensor.
Cheap price single row deep groove ball bearing for sale online. The deep groove ball bearing comes with inner diameter of 10mm, outer diameter of 26mm, and width of 8mm. The 10mm grooved roller bearing is made of high-quality material which makes the deep groove bearing performance more stable and durable.
Get a small torque limiter at low cost. It is available with a 10mm plain bore, long service life and large transmission torque. The friction torque limiter is specially designed for mechanical automation equipment. 6.9~27 N.m or 14~54 N.m torque range for selection.
Cost effective drawn cup needle roller bearing features a 10mm inner diameter, 14mm outer diameter, width of 10mm, and P2 accuracy class. The needle bearing has the advantages of higher load capacity, it delivers the durability to handle the high rigidity of the shaft based on varied types of applications.
The drum gear coupling is available for sale with a nominal torque of 1120 Nm and an allowable speed of 6300 rpm. This drum gear coupling offers high-efficiency performance, high rigidity, and flexibility, ideal for heavy-duty industrial applications.