Digital clamp meter with temperature function has the measuring range of -50℃~+1000℃ (-58℉~1832℉), duty ratio 10%~90%, AC current 0-600A, AC/DC voltage 0-600V, resistance 0-60MΩ, frequency 0-10MHz and capacitance 0-100mF. The maximum jaw opening size is 36mm. Digital clamp meter also has special functin of non-contact voltage test and True RMS measurement for sine wave signal.
Digital crane scale with seamless steel pipe housing has a 5 digits red LED display with optional weighing units kg / lbs and a wireless infrared remote controller. Crane scale has high capacity 30000kg (30 ton) / 50000kg (50 ton), accuracy standartd OIML class III, protection class IP65, battery continuous operation time 100 hours, can be used for weighing under overhead crane or heavy duty lifting equipment in the process of lifting, loading or unloading.
Digital differential pressure gauge for sale online. It can measure clean air in the range of -30Pa~5kPa, equipped with a high-precision differential pressure sensor, multiple pressure unit switching, high/low pressure alarm, sound, and light alarm. Cost-effective differential pressure gauge is suitable for differential pressure measurement and control of clean rooms, operating rooms, clean rooms, ventilation systems and fan testing.
Favorably priced digital noise level meter provides users with an efficient and accurate noise measurement experience with a measurement range of 30 to 130dB, and the model is available in an optional Bluetooth style for data transfer via app connection. Its backlight function and data hold function make operation easier in low-light environments.
Buy an EMF meter (electromagnetic field meter) from manufacturer online. 3 in 1 EMF detector has a built-in high-sensitivity sensor, over-limit sound and light alarm function, measurement unit switch and large LCD screen display, can simultaneously detect electric field radiation (1-1999V/m), magnetic field radiation (0.1-999.9mG) and radio frequency radiation (0.01-19.99mW/m2).
Good price handheld digital panel meter designed for load sensors, with 2000Hz and 12800Hz sampling speed optional, accuracy up to 0.05%, support -15 ~ +15mV signal input, equipped with 4-inch color touch screen, display unit support kN/kg/lb/N/g/N-m, suitable for a variety of force measurement application scenarios.
Purchase favorable price high voltage differential probe for an oscilloscope, with bandwidth from 70MHz to 200MHz, and maximum input differential voltage 1500V/7000V/14kV. This active differential probe is designed to measure the voltage difference between two points in a circuit without affecting the circuit’s operation.
Favorable price indoor air quality monitor can perform 24-hour real time monitoring PM2.5, HCHO, TVOC, PM10, Temperature, Humidity and AQI. The air quality meter also supports time and alarm functions. With multiple independent sensors, high accuracy and fast response. Large LCD display, showing real-time air quality readings. Light and portable, easy to use.
Competitive price oval gear flow meter with liquid crystal display for sale. The working temperature of gear flow meter between 30°C and 80°C. IP65 high protection level can be used at ease. oval gear flowmeter often used in petroleum, chemical and pharmaceutical field.
Good price ph detector for sale, offers a TDS range of 1-19999 ppm, a pH range of 0.00-14.00, and a temperature range of 0-60°C (32-140°F). Pen type pH meter provides high precision with a resolving power of 1 ppm for TDS and 0.01 pH for pH measurements. The accuracy is ±2% for TDS, ±0.05 pH, and ±0.5°C for temperature readings.
Soap film flow meter designed for gas volume measurement, suitable for 0.1~30L/min multi-range selection, measurement accuracy better than ±1%, suitable for laboratory and industrial testing use, the price is affordable andcost-effective.
The thermocouple temperature data logger (K/T type) is a high-precision, single-channel contact temperature measuring instrument with a high accuracy of ± (0.3% |t| + 0.40) °C. The IP52 protection level ensures its normal use in dusty and water mist environments. It has a built-in dot matrix LCD display with backlight, supports K-type and T-type thermocouples, and has a calibration function.
High quality ultrasonic 3D anemometer for sale. 3D anemometer with 0-50m/s measurement range, can simultaneously measure wind speed and direction parameters on the U, V, W axis. Ultrasonic technology demonstrates the advantages of anti-interference and rapid response. Ultrasonic 3D anemometer widely used in meteorological monitoring, urban management, agriculture and forestry, airports, wind power generation, tunnels and bridges.
Buy ultrasonic wind speed and direction sensor online at factory price, stainless steel material, 0-60m/s or 0-70m/s measuring range, 0-5V or 4-20mA analog signal, optional cable length 0.5m to 15m, heating function available. By analyzing the time it takes for the sound waves to travel between the transducers, this anemometer sensor calculates the wind's speed and direction.
Low price wind direction anemometer sensor with 0~360° measuring range, RS485 signal output can measure wind direction. Extreme wind speed>70m/S 30min, working at 12~30V DC, aluminum alloy body and vane material, easy to install.
Duct mounted wind speed anemometer sensor is a high precision wind speed measurement device, sensitive response, which can quickly and accurately measure small wind speed, working at 12V DC or 24V DC voltage, selectable 0~15m/s, 0~20m/s, 0~30m/s wind speed. It is easy to install and withstand strong electromagnetic interference such as a field frequency converter.
The argon flow meter covering the range of 0~2L/20/100L/min is available for sale, with internal alarm function and RS485/1~5V/4~20mA output options. Equipped with LCD display for reading display, the detection status is clear at a glance.
The digital clamp meter is an AC clamp meter with AC current range 0-1000A, AC voltage range 0-750V, DC voltage range 0-1000V, resistance range 0-2000MΩ and maximum jaw opening size 55mm. AC clamp meter also has special functions of white backlight, automatic power off, manual range selection, data hold, diode test, on-off buzzer and overload protection.
DC Current shunt is a device used in electrical circuits to measure or divert a portion of the current flowing through the main circuit. Current shunt is typically a low-resistance pathway connected in parallel to the main current path. Shunt current measurement is often used in telecommunication equipment, electric vehicle, aerospace, and charging station.
Digital earth ground tester is designed to measure the earth ground resistance, measuring range available
with 0 to 2000 Ohm or 0 to 4000 Ohm. The meter can also perform earth voltage test, 0 ~ 200V or 0 ~ 400V. Large LCD display with backlight, easy to read. High stability and low cost.