Blog

The gyroscope sensor is an easy-to-use control system for free-space movement and gesture-based positioning. It was originally applied to helicopter models, and now it has been widely used in mobile portable devices such as mobile phones. For those unfamiliar with this type of product, the gyroscope sensor is an easy-to-use control system that based on the free-space movement and gesture positioning.

Many items have several names, and many of them are very similar, such as grapes and raisins, oranges and oranges, cherries and cherries. They are very similar in appearance but they are not the same item. There are also the same situation in the industrial instrument industry. Although pressure transmitters and pressure sensors have similar names, they are indeed two completely different types of accessories. Their differences are mainly reflected in the following aspects. The ATO will provide you with detailed description on their differences.

Basically, an AC generator is an electrical machine that converts mechanical energy into electrical energy in the form of Alternating Current (AC). The basic principle behind the working of an AC synchronous generator is also Faraday's law of electrical induction, somewhat similar to the working of a DC generator.

Variable speed pool pump is a horizontal direct centrifugal pump, the motor has an extended shaft directly connected with the impeller, with a preset filter. ATO offers swimming pool pumps with different powers, 1 hp variable speed pool pump, 1.5 hp variable speed pool pump, 2 hp pool pump and so on. In this article, ATO automation will show you the price of our variable speed pool pump.

Before choosing a suitable slip ring, it is necessary to carefully check the working environment, and form clear and accurate size or style requirements for the required type of slip ring, otherwise, it will fail to install, or it will be stuck and unable to rotate after installation. Of course, the maintenance cost in the future must also be considered. The service life of different slip rings varies from millions to hundreds of millions of revolutions. The ideal service life of the entire mechanical system depends to a certain extent on the process and materials used. Under the influence of the market economy, the technology and materials used in the expensive conductive slip rings are guaranteed to a certain extent, and the service life is also long.

Since the static electricity of the object to be eliminated has been guaranteed before printing, why is it still necessary to remove static electricity during the printing process?
At present, the main printing processes in the domestic market are divided into three types: emboss printing, offset printing, and screen printing. In their printing process, many frictions are generated, so that the static electricity on the surface of the object will be much higher. If the static electricity is not well controlled during printing, it is easy to cause electrostatic ink shifts and cross-color phenomena on the printed matter. , And in the printing process, due to high-speed friction, peeling will generate static electricity and the accumulation of static electricity can easily lead to air discharge, resulting in electric shock or fire. So how can we control the generation and elimination of static electricity in the printing process? It is to ensure that the substrate has no static electricity before contacting it, and also that there is no static electricity on the surface of the finished printed matter. This process is very cumbersome and simple. In other words, it is necessary to ensure that there are absolutely enough negative ions in the printing process to give the object to be eliminated.

Mud pumps are often used in the field of oil drilling and are an important part of drilling equipment. They are mainly used to transport flushing fluids such as mud or water into the borehole during the drilling process. Commonly used mud pumps are piston-type or plunger-type. The power machine drives the crankshaft of the pump to rotate, and then the crankshaft drives the plunger or piston to reciprocate in the pump cylinder through the crosshead. Under the alternating action of suction and discharge, the flushing fluid is circulated.

Gas detectors have a wide range of applications in the industrial field, and their application value is increasingly valued and concerned by people. We know that gas detectors are divided into toxic gas detectors, combustible gas detectors, portable gas detectors, and stationary gas detectors. So what is the difference between a combustible gas detector and a toxic gas detector?

A voltage sensor is a sensor that is used to calculate and monitor the amount of voltage in an object and to feel the measured voltage. And it can convert voltage into output signal. There are two main types of voltage sensors: capacitive voltage sensors and resistive voltage sensors.

At present, CNC router machines have gradually replaced traditional manual engraving, because CNC machines have unmatched speed, precision, and energy. Technology makes CNC router machines many advantages, and they can also automatically typeset, so it can effectively reduce costs and save materials, so people will start to use it. ATO CNC router machine is suitable for various materials, such as aluminum, bronze, plastic board, wood, PVC, PCB or other plastics, bakelite, etc. This CNC router machine is mainly used for drilling, circuit board engraving, small parts cutting and mold engraving, etc.

A well pump is an electromechanical piece of equipment that gets installed after drilling or digging a well. Its purpose is to pump the water from your well into your house. Using centrifugal force, a well pump shoots water from its underground reservoir up to your home for use. The depth at which your well sits will determine which style of well pump you'll need. An electric motor drives an impeller or centrifugal pump, which pushes water from your well through a jet or pipe. In this article, you'll learn about how to choose well pumps.

A dosing pump is a special volumetric pump used to transport liquids, especially corrosive liquids. The flow can be adjusted steplessly in the range of 0-100%. The dosing pump is also called a quantitative pump or a proportional pump. The dosing pump belongs to the reciprocating positive displacement pump. It is used for precise metering. Usually, the stability accuracy of the dosing pump is required to be no more than ±1%. With the continuous development of modern industry towards automatic operation and long-distance automatic control, the advantages of dosing pumps are particularly prominent because of their strong compatibility and adaptability to a wide range of media (liquids).

How does the dosing pump measure? The dosing pumps of the same model and specifications have different internal structure designs, so the metering methods are different. For example, the working principles of plunger and diaphragm dosing pumps are different, and there is also a difference in metering accuracy.

Foot switch is a kind of switch that controls circuit on and off by foot stepping or stepping. It is used in the control circuit that cannot be touched by hands to replace hands to achieve the purpose of operation. Electric foot switch, momentary foot pedal swirch, foot pedal switch can be provided in ATO store. In this article, we will show the price list of our foot switch.

A rotary gear pump is a kind of rotary pump, which occupies a very important position in daily production. So do you know the concept of the rotary gear pump? Next ATO will introduce the information of rotary gear pump for you in detail.

Everyone is no stranger to dc cooling fans, is common in our daily life, applied to a variety of places, mainly to cooling of equipment, equipment in the process of trying to use the product too much quantity of heat to seriously affect the normal use of equipment, lead to equipment damage, so you need to use a cooling fan for cooling, then dc cooling fan is also need maintenance and maintenance. In this article, we will focus on how to maintain the DC cooling fan.

Nowadays, various types of drones and robots are being used more and more widely. Brushless motors are small in size, light in weight and fast in speed, and these features can be said to be very suitable for drones. In this article, we will introduce why brushless motors are more suitable for drones.

Choosing an ESC is an important part of the bldc motor. You want to ensure that it meets the electrical needs of your brushless motor without draining your battery more than necessary. Below are a few factors to consider when choosing an ESC.

A rotary gear pump belongs to the volumetric rotary pump, which has more than two internal gears that generate vacuum pressure by the mechanical movement of the gears, with the purpose of driving the movement of the fluid inside the pump.

The structure and working principle of hydraulic pumps and hydraulic motors are very similar, and some people often confuse the two. The hydraulic pump is the place where work is required to convert mechanical energy) into pressure energy, and the system that transports the pressure oil needs to do work. The hydraulic motor converts pressure energy into mechanical energy, and the pressure oil drives the blades in the hydraulic motor to rotate, thereby driving the mechanical work connected to the hydraulic motor shaft. ATO.com provides hydraulic pumps and hydraulic motors are energy conversion elements in hydraulic transmission systems. What's the difference between the two?