Blog

The accelerometer is one of the basic measurement elements of inertial navigation and guidance systems. In other words, the accelerometer is an oscillating system installed inside the motion carrier to measure the motion acceleration of the carrier. The gyroscope is called an angular velocity sensor, which is different from an accelerometer. The physical quantity it measures is deflection and tilt rotational angle speed. Many of us often hear the term accelerometer sensor and gyroscope sensor, but what is the difference between them？With these questions, ATO will introduce them to you.

As we all know, the application of accelerometers in the field of automotive electronics becomes increasingly extensive. In these applications, it is usually necessary to measure the acceleration data based on the vehicle coordinate system, which requires the direction of each sensing axis of the acceleration sensor to be consistent with the vehicle coordinate system.

Air operated double diaphragm pump is a new type of conveying machinery. It uses compressed air as the power source. It can absorb all kinds of corrosive liquids, liquids with particles, high viscosity, volatile, flammable and highly toxic liquids. It is used more and more in the chemical industry, but when many customers purchase pneumatic pumps, they find that they cannot pump liquids at all.

Diaphragm pumps are widely used in some industries and are almost indispensable. The diaphragm pump sucks and discharges gas by means of the reciprocating motion of the diaphragm in the pump body, so the diaphragm is a very important part of the pump body, and its performance has a great influence on the pump. The life of the diaphragm is embodied in several aspects, bending Life, corrosion resistance, high and low temperature performance, so the range of diaphragm materials to meet the above requirements is greatly reduced.

Air operated diaphragm pumps are widely used in professional equipment and services for environmental protection engineering, medium and large food factories, sewage treatment projects, sewage reuse projects, papermaking, printing, electroplating and other industries. Aluminum alloy air operated diaphragm pumps can be used in many special occasions, even in harsh environments.

The lobe pump belongs to the delivery pump, which is a rotary positive displacement pump, also called the rotor pump. It is widely used in food processing, oil production, household chemicals and sewage treatment. The lobe pump is mainly composed of the pump body, cam rotor, pump cover sealing device, transmission device, driving device, etc. The lobe pump is driven by the motor, and the cam rotors on the respective shafts are driven to rotate in reverse meshing synchronously by the gears that are synchronized with the transmission.

ATO lobe pump is an industrial machine, which mainly relies on the suction generated by the rotor when it rotates, and then transports all the materials that need to be transported to the discharge port according to different mesons. lobe pumps are widely used in petrochemical, fine chemical, daily chemical, pharmaceutical, food, environmental protection, paper, paint, metallurgy and other industries. The following ATO will explain to you how to choose the correct rotary lobe pump.

Diaphragm pump is a new type of mechanical transportation equipment, which can be used for all kinds of corrosive liquids, liquids with particles, high viscosity, volatile, flammable and highly toxic liquids. And the diaphragm pump is available in plastics, aluminum alloys, stainless steel, cast iron, etc. for everyone to choose from. So, how to choose a right diaphragm pump?

Electric ball valves are generally connected to the ball valve by an electric actuator. After debugging through the device, it will become an electric ball valve. The electric ball valve is powered by electric energy, opens the electric actuator to drive the ball valve, completes the switching and conditioning of the ball valve, and then achieves the intention of switching or conditioning the pipeline medium.

There are many types of peristaltic pump, common industrial peristaltic pump, micro peristaltic pump and other peristaltic pump in various industries. These peristaltic pumps are welcomed by various industries because of their low maintenance cost and long service time. Some customers reflect that the peristaltic pump flow is not accurate, here we teach you how to make the peristaltic pump flow delivery more accurate.

The gas mass flow meter is an instrument that measures the flow of gas using the principle of thermal dispersion. The sensor consists of two reference-level RTDs (thermal resistance devices). One is a velocity sensor RH and the other is a temperature sensor RMG that measures the change in gas temperature. when these two RTDs are placed in the gas being measured, one of the sensors RH is heated and the other sensor RMG is used to sense the temperature of the gas being measured. As the gas flow rate increases, the gas stream takes away more heat, and the temperature of sensor RH decreases.

Peristaltic pumps can work in the occasion of continuous delivery of fluids, and at the same time can find and solve many difficult problems in fluid delivery in time. It can transport sewage, suspended solids, corrosive chemicals, and other fluids with flow rates of up to 40 liters per minute. ATO peristaltic pumps are often used to transport fuel liquid, chemical etching liquid for etching, printing ink, laundry chemical solution, grinding liquid, lubricating liquid, etc.

Pipette also known as the single line pipette, is used to accurately remove a certain amount of liquid, is a common glass instrument in the laboratory daily inspection. In the content determination, the quality of pipette and the method of use have a great influence on the accuracy of the final data. In order to ensure the accuracy of the liquid volume and the reliability of the experimental results, we can pay attention to these aspects. In this article, we mainly introduce the key points when using pipette.

Gas detectors can help you make safety decisions more easily. ATO gas detector not only provides clear gas detector status and sensor information, but also reminds what to do after an alarm. This way you don't have to worry about interpreting gas detector alarm readings. So, what are the essential functions of the gas detector?

Electric winches are the most common type of winches and are driven by the vehicle's own electrical system. Electric winches are used in many places. They can be installed on vehicle-mounted cranes. They are the vehicle-mounted cranes that we usually install on vehicles. They can be connected to 12V or 24V voltage of cars, and can be used wherever they go. They can also be installed on off-road vehicles. On the road, when you are stuck in a mud puddle when you are off-road in the desert, you can easily pull out a multi-ton off-road vehicle with an electric winch.

The ultrasonic flowmeter is the "velocity difference method" as the principle, measuring the flow of liquid in a circular tube instrument. It adopts advanced multi-pulse technology, signal digital processing technology, and error correction technology so that the flow meter can better adapt to the industrial site environment, and measurement more convenient, economic, and accurate. The product has reached the advanced level at home and abroad and can be widely used in petroleum, chemical, metallurgy, electric power, water supply and drainage, and other fields.

The peristaltic pump is mainly suitable for all kinds of complex liquid proportioning, suitable for metering and feeding, and can realize high-precision flow transmission control. The peristaltic pump has low noise and easy operation, stable performance, a large flow rate of data storage when powered off and can be timed. It is widely used in environmental protection, medicine, food, the chemical industry and other fields, as well as laboratories in universities and other related industries.

In order to ensure the accuracy and precision of the pipette, regular maintenance should be carried out according to the specific use situation. The pipette should be cleaned especially after removal of corrosive solvents. By simple cleaning and maintenance, the service life of the pipette can be properly extended. In this article, we will introduce the methods of pipette cleaning.

Many people often get confused with the terms Synchronous and Asynchronous motors and what exactly are their applications. In this article, we will see what a synchronous motor is and how it differs from an asynchronous motor. We will compare and contrast the general working principles their advantages and where are they normally used and what can be achieved using each of these motors. of synchronous and asynchronous motors.

Toxic gas detector is an instrumentation tool for detecting the concentration of toxic gas leaks, mainly referring to portable or handheld gas detectors. Toxic gas sensors are mainly used to detect gas species present in the environment. Unlike the combustible gas detector, the toxic gas detector can be used universally. For example, carbon monoxide detector and CL₂ gas detector are both called toxic gas detectors, but because the specific gases they measure are different, these two are completely different toxic gas detectors.