Blog

Industrial Ethernet switch, that is, Ethernet switch equipment applied in the field of industrial control, because of the network standard adopted, its openness, wide application and low price, the use of transparent and unified TCP/IP protocol, Ethernet has become the main communication standard in the field of industrial control. We need to know not only what an industrial switch is, but also what its advantages are. In this article, ATO automation will give you a detailed introduction.

Pure sine wave inverter applies in the long term, it is inevitable due to the combined effect of a number of internal and external factors and the emergence of certain failure, thus affecting the normal use of the device. Then, we need to find specialized service personnel to repair the fault detection. Maintenance is also an important part to ensure normal use. In the following, ATO automation will tell you how to fix it.

Hydraulic actuator converts the pressure of fluid into mechanical energy. Common types of hydraulic actuators include linear actuators, rotary actuators, semi-rotary actuators and so on. 90°, 180°, 200°, 220°, 360° rotation angle and 180 N.m, 500 N.m, 2800 N.m, 4500 N.m and 2400 N.m output torque hydraulic rotary actuator can be provided in ATO online shop. In this article, we will show you the price list of our hydraulic rotary actuator.

Air cooled water chiller is a water cooling equipment that can provide constant temperature, constant flow and constant pressure. Many people in the purchase of the required industrial chiller, often ignore some basic aspects of the refrigeration unit water pipe in the installation and construction process. So, how to pipe the water chiller? ATO.com will introduce some steps for you.

Air cooled chiller is one of the chiller models. It cools the normal temperature water to a certain temperature through the compressor of the chiller to strengthen the cooling mold or machine. It is used as a single machine, and the cooling device is the built-in fan. We should not only know what is the chiller, but also know what characteristics of the water chiller. In this article, ATO industrial automation will introduce something about this.

Industrial Ethernet switches are designed to meet the needs of flexible industrial applications and provide a cost-effective industrial Ethernet communication solution. The networking mode is more focused on loop design. In this article, ATO automation will introduce three networking modes of industrial Ethernet switches: serial port management, web management and network management software management.

As our society increasingly relies on technology, precision equipment and automation, the requirements for automation systems, such as tool locators and detection systems, will increasingly become a standard practice. CNC machine tool height setters are used widely on cnc machining centers, lathe cnc machines, milling machines, grinding machines and many or specialist machining application. In this article, ATO industrial automation will introduce the benefits of tool setter.

or a CNC machine center equipped with a tool setter, the offset value of the tool to the workpiece coordinate system can be automatically set after the tool setting, thereby automatically establishing the workpiece coordinate system. During the processing of the workpiece, the adjustment of the tool is time-consuming, inconvenient and difficult. Finally, trial cutting is required. In this article, we will show the price list of our tool setter.

Explosion proof solenoid valve is made of a full number of turns coil and aluminum alloy material and other common fine process of die casting, it is mainly suitable for full of gas, hydrogen and natural gas and other explosive gas environment. Although explosion proof solenoid valve has many advantages, but also can be improved. In this article, we will give you a detailed introduction to the explosion proof solenoid valve can be improved.

There are many types of cable, and in different places and construction environment, the performance requirements for cable are different. Generally in some outdoor application environment is more harsh conditions, will choose the cable drag chain to meet the requirements of production. So when installing this kind of cable, how to fix it to meet the requirements of production? In this article, ATO automation will introduce key points about this.

Several factors relate to how to choose the best cable track for your application. The material used for the cable track depends on the type required, how you want it to move and the level of durability required. Selecting the correct drag chain will prevent premature failure of the carrier or internal cable. In order to help you to choose a suitable cable drag chain, ATO industrial automation will introduce some key points when you choosing a cable drag chain.

Drag chain is a device that binds cable or wire or air compressor and oil compressor to facilitate its rotation and movement. It is a protective covering that secures cables or hoses to keep them separated and permit movement around automated machinery. Consequently, with numerous industries embracing automation, the need for these drag chains is essential. In this article, we will introduce the applications of drag chain.

Toggle switch is to switch the circuit by turning the switch handle to make the circuit on or off, so as to achieve the purpose of switching the circuit. 2 pin, 3 pin or 6 pin toggle switch; on/off, on/off/on toggle switch and lighted toggle switch can be provided in ATO shop. In the following, we will show our toggle switch price list in detail.

Solenoid valve is an industrial equipment controlled by electromagnetic, which is used to control the automatic basic components of the fluid and belongs to the actuator. Used in industrial control systems to adjust the direction, flow, speed and other parameters of the medium. Explosion proof solenoid valve is a kind of solenoid valve. Compared with other solenoid valves, it also has a long service life. So how do we choose the right explosion proof solenoid valve? In this article, we will introduce some key points about the selection of explosion proof solenoid valve.

A pipette is a device for quantitatively transferring liquid. A pipette is generally used to remove small or trace amounts of liquid in analytical testing studies. Forward pipetting and reverse pipetting are the 2 methods of piprtting. Before pipetting, to make sure the pipette, nozzle, and liquid are at the same temperature. In this article we will describe these two pipetting methods in detail.

Solenoid valve is a kind of industrial equipment controlled by solenoid. It is a basic component for automatically controlling fluid. It belongs to the actuator, not limited to hydraulic and pneumatic. The solenoid valve can cooperate with different circuits to complete the expected control, ensuring the accuracy and flexibility of the control. There are many kinds of solenoid valves, different solenoid valves have different functions. In this article, ATO industrial automation will give you a comparison of explosion proof solenoid valve and general solenoid valve.

Pipette is a device for quantitative transfer of liquid, which is widely used in analysis and testing, chemistry and other fields and clinical diagnostic laboratories. We commonly use manual adjustable pipette and electric points, specific also according to the different volume of liquid removal has many optional specifications. We not only need to know how to use the pipette, the most important thing is to know what to pay attention to when using it. In this article, ATO automation will give you a detailed introduction.

Explosion proof solenoid valves are all the devices may be lit with explosive gas mixture components enclosed in a shell, the shell can withstand any shell joint surface or structure clearance, infiltrate into the inside of the shell of combustible mixture in the internal explosion damaged, and not caused by outside a gas or vapour formation of explosive environment, a variety of lighting. In this article, we will show you the price list of ATO explosion proof solenoid valve.

Three-axis accelerometers are widely used in aerospace, robotics, automotive and medical fields. It is based on the basic principle of acceleration to achieve work, with traits of small size and light weight. It can measure the acceleration in space and comprehensively and accurately reflect the motion properties of objects.

An anemometer is an instrument used to measure the speed or velocity of gases either in a contained flow, such as airflow in a duct or in unconfined flows, such as atmospheric wind. To determine the velocity, an anemometer detects changes in some physical property of the fluid or the effect of the fluid on a mechanical device inserted into the flow.