Tag: how to

Pressure sensor is a device or device that can feel pressure signal and convert it into usable output electrical signal according to certain rules. Pressure sensor usually consists of pressure sensor and signal processing unit. In addition to understanding the basic information of some pressure sensors, we should also know how to maintain and pay attention to some key points in use. In this article, ATO industrial automation will give you a detailed introduction.

Pure sine wave inverter applies in the long term, it is inevitable due to the combined effect of a number of internal and external factors and the emergence of certain failure, thus affecting the normal use of the device. Then, we need to find specialized service personnel to repair the fault detection. Maintenance is also an important part to ensure normal use. In the following, ATO automation will tell you how to fix it.

Air cooled water chiller is a water cooling equipment that can provide constant temperature, constant flow and constant pressure. Many people in the purchase of the required industrial chiller, often ignore some basic aspects of the refrigeration unit water pipe in the installation and construction process. So, how to pipe the water chiller? ATO.com will introduce some steps for you.

Explosion proof solenoid valve is made of a full number of turns coil and aluminum alloy material and other common fine process of die casting, it is mainly suitable for full of gas, hydrogen and natural gas and other explosive gas environment. Although explosion proof solenoid valve has many advantages, but also can be improved. In this article, we will give you a detailed introduction to the explosion proof solenoid valve can be improved.

Several factors relate to how to choose the best cable track for your application. The material used for the cable track depends on the type required, how you want it to move and the level of durability required. Selecting the correct drag chain will prevent premature failure of the carrier or internal cable. In order to help you to choose a suitable cable drag chain, ATO industrial automation will introduce some key points when you choosing a cable drag chain.

Solenoid valve is an industrial equipment controlled by electromagnetic, which is used to control the automatic basic components of the fluid and belongs to the actuator. Used in industrial control systems to adjust the direction, flow, speed and other parameters of the medium. Explosion proof solenoid valve is a kind of solenoid valve. Compared with other solenoid valves, it also has a long service life. So how do we choose the right explosion proof solenoid valve? In this article, we will introduce some key points about the selection of explosion proof solenoid valve.

As we all know, the application of accelerometers in the field of automotive electronics becomes increasingly extensive. In these applications, it is usually necessary to measure the acceleration data based on the vehicle coordinate system, which requires the direction of each sensing axis of the acceleration sensor to be consistent with the vehicle coordinate system.

Diaphragm pumps are widely used in some industries and are almost indispensable. The diaphragm pump sucks and discharges gas by means of the reciprocating motion of the diaphragm in the pump body, so the diaphragm is a very important part of the pump body, and its performance has a great influence on the pump. The life of the diaphragm is embodied in several aspects, bending Life, corrosion resistance, high and low temperature performance, so the range of diaphragm materials to meet the above requirements is greatly reduced.

ATO lobe pump is an industrial machine, which mainly relies on the suction generated by the rotor when it rotates, and then transports all the materials that need to be transported to the discharge port according to different mesons. lobe pumps are widely used in petrochemical, fine chemical, daily chemical, pharmaceutical, food, environmental protection, paper, paint, metallurgy and other industries. The following ATO will explain to you how to choose the correct rotary lobe pump.

Diaphragm pump is a new type of mechanical transportation equipment, which can be used for all kinds of corrosive liquids, liquids with particles, high viscosity, volatile, flammable and highly toxic liquids. And the diaphragm pump is available in plastics, aluminum alloys, stainless steel, cast iron, etc. for everyone to choose from. So, how to choose a right diaphragm pump?

There are many types of peristaltic pump, common industrial peristaltic pump, micro peristaltic pump and other peristaltic pump in various industries. These peristaltic pumps are welcomed by various industries because of their low maintenance cost and long service time. Some customers reflect that the peristaltic pump flow is not accurate, here we teach you how to make the peristaltic pump flow delivery more accurate.

In order to ensure the accuracy and precision of the pipette, regular maintenance should be carried out according to the specific use situation. The pipette should be cleaned especially after removal of corrosive solvents. By simple cleaning and maintenance, the service life of the pipette can be properly extended. In this article, we will introduce the methods of pipette cleaning.

Before choosing a suitable slip ring, it is necessary to carefully check the working environment, and form clear and accurate size or style requirements for the required type of slip ring, otherwise, it will fail to install, or it will be stuck and unable to rotate after installation. Of course, the maintenance cost in the future must also be considered. The service life of different slip rings varies from millions to hundreds of millions of revolutions. The ideal service life of the entire mechanical system depends to a certain extent on the process and materials used. Under the influence of the market economy, the technology and materials used in the expensive conductive slip rings are guaranteed to a certain extent, and the service life is also long.

A voltage sensor is a sensor that is used to calculate and monitor the amount of voltage in an object and to feel the measured voltage. And it can convert voltage into output signal. There are two main types of voltage sensors: capacitive voltage sensors and resistive voltage sensors.

A well pump is an electromechanical piece of equipment that gets installed after drilling or digging a well. Its purpose is to pump the water from your well into your house. Using centrifugal force, a well pump shoots water from its underground reservoir up to your home for use. The depth at which your well sits will determine which style of well pump you'll need. An electric motor drives an impeller or centrifugal pump, which pushes water from your well through a jet or pipe. In this article, you'll learn about how to choose well pumps.

A dosing pump is a special volumetric pump used to transport liquids, especially corrosive liquids. The flow can be adjusted steplessly in the range of 0-100%. The dosing pump is also called a quantitative pump or a proportional pump. The dosing pump belongs to the reciprocating positive displacement pump. It is used for precise metering. Usually, the stability accuracy of the dosing pump is required to be no more than ±1%. With the continuous development of modern industry towards automatic operation and long-distance automatic control, the advantages of dosing pumps are particularly prominent because of their strong compatibility and adaptability to a wide range of media (liquids).

Everyone is no stranger to dc cooling fans, is common in our daily life, applied to a variety of places, mainly to cooling of equipment, equipment in the process of trying to use the product too much quantity of heat to seriously affect the normal use of equipment, lead to equipment damage, so you need to use a cooling fan for cooling, then dc cooling fan is also need maintenance and maintenance. In this article, we will focus on how to maintain the DC cooling fan.

Choosing an ESC is an important part of the bldc motor. You want to ensure that it meets the electrical needs of your brushless motor without draining your battery more than necessary. Below are a few factors to consider when choosing an ESC.

The booster pump is a pump used for boosting, which is mainly used for water heater boosting, low water pressure in high-rise buildings, sauna, bath boosting, insufficient water pressure on the top floor of the apartment, solar automatic boosting, reverse osmosis water purification booster, etc. The booster pump is the core part of the water supply equipment, just like a windmill, which continuously pressurizes the water to a high place to ensure the normal operation of the water supply equipment.

In order to avoid stagnant materials in the pipeline sticking to the instrument and affecting its performance or possibly damaging it, the pipeline should be purged before the instrument is fitted. A magnetic filter should be fitted at the instrument's inlet if it is unavoidable. Prior to installation, it is also required to choose whether the instrument should be put horizontally or vertically. If the meter includes an LCD display, it is crucial to remember that the installation location should be as far away from direct sunlight as is practical to avoid shortening the LCD's service life. Let's follow ATO's example and investigate to learn more information!