Tag: how to

We've all used a pressure cooker, or seen heating, etc. These are our common things, and there will be a pressure relief valve device on these things. So, what approach do we need to take when purchasing? How to choose a pressure relief valve? With these questions in mind, we start today's topic.

pH meter, also called acidity meter, is often used to measure and detect the pH of liquid media, and is currently widely used in industries, agriculture, and environmental protection. If the measured data is inaccurate, it will cause serious consequences to the project or the environment, so the correct use of the pH meter is extremely important. When using PH timing, we need to strictly follow the correct method and sequence in order to obtain more accurate measurement data. So let's take a look at the correct steps and working principle of using a pH meter.

A weighing system utilizes scales & other measurement devices to help perform an operation. Weighing systems are used in many applications, including automation, quality control, data collection & more. These systems help increase efficiency, decrease deviation from a set standard, and can even make data management effortless. Do you know how to make sure your weighing system gives accurate weight? ATO will go over five factors that can affect the weighing system's accuracy and advises selecting, installing, and operating the system to handle these factors.

Centrifuges are essential equipment used in various industries such as pharmaceuticals, biotechnology, chemical engineering, food processing, and wastewater treatment. They are used to separate solid and liquid components from different mixtures, and they can perform this task at a rapid pace. However, centrifuges are complex machines that require proper maintenance to ensure their optimal performance, longevity, and safety. In this blog post, ATO will discuss the importance of centrifuge maintenance and provide some routine tips on how to maintain the centrifuge machine.

Pneumatic screwdrivers are very common but essential tools in the assembly and maintenance industry. They can play a great role in assembly operations, especially after the emergence of electric and pneumatic tools, and they exist in every enterprise with assembly and maintenance. Pneumatic screwdrivers are not only convenient, but can also improve efficiency. The following is a brief introduction to the working principle of the pneumatic screwdriver.

The vacuum contactor is a switch driven by an electromagnet. Its function is to connect and disconnect the moving contacts and static contacts of the electrical equipment circuit, so as to realize the function of frequently connecting and cutting off the normal working current. It is used in switching break and control circuit. Vacuum contactors can be widely used in industries, power plants, mining, ports and other industries. In order to prove the quality of the vacuum contactor, we can test the vacuum contactor by different methods, and then we will introduce several testing methods for you in detail.

Solid state relays generate heat when they are in operation. A heat sink for a solid state relay is a device that is used to dissipate the heat generated by the solid state relay during its operation. The heat sink is designed to absorb and dissipate this heat away from the solid state relay. It is typically made of a thermally conductive material such as aluminum, which helps to transfer the heat away from the solid state relay and into the surrounding air. Choosing the right heat sink helps to increase the efficiency and service life of solid state relays. In this article, ATO automation will help you choose the right heat sink with three questions.

How can you easily determine whether a load cell is still functional? As the most essential as well as the most vulnerable part of electrical scales, load cells' proper functioning has a lot to do with the accuracy of weighing. In this article, ATO will be showing you a simple way to test your load cell quickly and easily.

The chamfering machine is a kind of equipment specially used for chamfering the edge of metal materials. Its working principle is based on the principle of cutting, and the edge of the material is cut by rotating cutting tools (such as blades, drills, grinding wheels, etc.) to form the desired chamfer shape. The chamfering machine can use different mechanical principles, such as rotation, swing, lifting, etc., to achieve different types of chamfering. So, how does the chamfering machine chamfer? It will be described in detail below. 

Chamfering machines are an essential tool for achieving a clean and polished finish on metal and other materials. However, improper use can lead to accidents, equipment damage, and subpar results. That's why it's crucial to follow proper operating procedures when using a chamfering machine. Here are some guidelines to follow when operating a chamfering machine.

A digital inclinometer is an instrument used to measure angles. It is used in a wide range of applications, such as in machinery manufacturing, aerospace, precision measurement, construction and photography, and so on, where angle measuring instruments can be applied. In order to better use the digital display inclinometer to measure accurate values, it is very necessary to calibrate the inclinometer. Next, we will introduce several common calibration methods. Interested friends will learn together.

Power transformers are electrical device that is used to transfer electrical energy between two or more circuits through electromagnetic induction. They facilitate power transfer between two parts of an electrical circuit and create isolation while varying voltage and current. Power transformers are available in different designs and toroidal power transformers are one of them. In this article, we will introduce how to build toroidal transformer better.

Transformer is a device that uses the principle of electromagnetic induction to change the AC voltage. Whether troubleshooting a transformer or replacing one, knowing how to test a transformer is an integral part of the process. The three primary tests used to determine the condition of a transformer are the open-circuit test, short-circuit test, and measurements of winding resistance. In this atricle, ATO industrial automation will introduce 3 methods of testing transformer.

Laser markers use laser beams to mark permanent marks on the surface of various substances. The effect of marking is to expose the deep substance through the evaporation of the surface substance, to "engrave" traces through the chemical and physical changes of the surface substance caused by light energy, or to burn off part of the substance through light energy to show the pattern and text that needs to be etched. Laser marking machine is mainly divided into, CO2 laser marking machine, semiconductor laser marking machine, fiber laser marking machine, and YAG laser marking machine. At present, laser marking machine is mainly used on some occasions with more refined and higher precision. Now, let's take a look at the operating procedures and maintenance specifications of the laser marker.

Rebar tying machine, also known as Automatic rebar tying machine or rebar tier, is a handheld battery rebar fast-tying tool. It is an intelligent tool with a built-in microcontroller that can automatically complete all steps of rebar bundling, which can be widely used in the field of construction engineering to replace manual bundling of rebar. The rebar tying machine is mainly composed of four parts: body, special wire reel, battery box, and charger. In this article, ATO will provide an operation guide on how to operate a rebar tying machine.

Science and technology are progressing, and the times are progressing. From people's daily life to industrial production, science and technology are indispensable both inside and outside. Nowadays, rebars are indispensable materials in bridges, other buildings and large-scale projects. Correspondingly, when workers operate, they will inevitably use some rebar processing machinery and equipment to straighten and cut off, which is our commonly used rebar cutter. Today, ATO industrial automation will take you to know the correct use method and maintenance tips of rebar cutter.

As one of the rebar processing machines, the rebar bender has a working structure of a horizontal working disc that rotates on a vertical axis. The rebar is placed at corresponding positions, the supporting pin shaft is fixed on the machine tool, and the central pin shaft and the bending pin shaft are installed on the working disk. When the disk rotates, the rebar is bent. In order to bend rebars of various diameters, there are several holes on the working plate for inserting and pressing the bending pins, and the center pins of different diameters can also be replaced accordingly. In this article, ATO industrial automation is going to tell the operation steps of our product electric rebar bender, which has an optional no-load power of 950W or 1300W.

ATO signal isolator is an instrument for transmitting, converting, isolating, transmitting and computing industrial signals in the automation control system. It can cooperate with various industrial sensors and field instruments to retrieve parameter signals, isolate transmission and transmission, and meet the needs of users locally. The need to monitor remote data. Instruments are widely used in data acquisition, signal transmission conversion, PLC, DCS and other industrial measurement and control systems in the fields of machinery, electrical, telecommunications, electric power, petroleum, chemical industry, steel, sewage treatment, building construction, etc., to improve and supplement the system analog I/ O The plug-in function improves the anti-interference ability of the automation control system and ensures the stability and reliability of the system.

Electric actuators are important devices in automatic control systems. Due to the limitation of use conditions, maintenance level and installation location, the control accuracy of electric actuators is generally about 3%, and some even exceed 5%, which seriously restricts the improvement of system adjustment quality. For fast-response control systems, it is even more important to improve the control accuracy of electric actuators. ATO various electric actuators are mainly used to control the working conditions of media such as gas, tar, steam, water, and waste gas. In production practice, according to different influencing factors, corresponding technical measures were taken, so that the control accuracy of electric actuators all reached more than 2%, and some exceeded 1.2%, which played a great role in improving the control system quality.

Globe valve refers to the valve whose closing piece moves along the center line of the seat. According to this form of movement of the valve disc, the change of the valve seat orifice is proportional to the valve disc stroke. As a result, this type of valve is well suited for use as a cutoff or adjustment and throttling. So how to use the globe control valve? In this article, ATO industrial automation will introduce to you.