UPS Inverter vs. Ordinary Inverter
With the development of society, electricity is more and more important to our life. Modern society also relies heavily on electrical powered appliances. When there is a power failure, the power to these devices is cut and they stop working. In order to solve these problems of power failure and no power available, ups inverters and ordinary inverters are designed. Both ordinary inverters and ups inverters are used to provide backup power for electronic equipment in the event of a power outage. But there are some differences between them, which will be mentioned in this article.
Basically, current flows in and out of various electronic devices in the form of alternating current (alternating current) or direct current (direct current). When power is available from commercial power sources, the inverter obtains the power in the form of AC and stores it in the battery. In order to do this, the inverter must convert AC power to DC power before storing it. In the event of a power outage, the power from the battery must be supplied to various electronic appliances, but cannot be distributed in the form of direct current. So the power inverter converts DC to AC and outputs AC to the device until the power outage is over. After the grid is restored, the inverter continues to convert alternating current to direct current and store it in batteries for future use.
A key difference between an ordinary inverter and ups power inverter is the time it takes to get power from the battery during a power outage. Offline ups (standard) switch to battery power within 3 to 8 milliseconds after the mains is cut off. The change time of the inverter is between 25 and 500 milliseconds. For this reason, equipment that cannot tolerate this time delay, or that could be damaged by an improper shutdown, such as computers or sensitive medical equipment, can be paired with a ups inverter instead of ordinary inverter. ATO online store provides a variety of power ups inverter can be for you to choose, efficiency up to 90%.
Another significant difference between the two is that true online double-conversion ups are considered capable of regulating and monitoring current fluctuations. UPS provides protection against line anomalies such as surges, voltage fluctuations, under/over voltage, spikes and noise. This is the main reason why the electronics of precision circuits use ups inverter instead of an inverter for backup. The purpose of UPS is to provide a short window (10 or 20 minutes) of power, enough time to save programs and data, and properly shut down your device. They are not going to provide electricity for a long time.
