How to Clean the Ultrasonic Cleaner?

Ultrasonic cleaning machines use of ultrasonic generator issued by a high-frequency oscillation signal, so that the liquid has a "cavitation effect" and produces a powerful shock wave, to strip the dirt layer of the cleaning machine. The advantages of an ultrasonic cleaning machine are a good cleaning effect, ease of operation, and widely used in the surface spray treatment industry, machinery industry, and electronics industry. To ultrasonic cleaning machine better work, usually on internal cleanup is crucial, then let's take a look at how to clean up the inside of the ultrasonic cleaning machine and how to follow up on maintenance.

Compared with other cleaning methods, ultrasonic cleaning machine has significant advantages. It can be cleaned with a complex shape, internal cavity, and small parts, especially in the general degreasing, antirust, phosphating, and other processes can be completed in just two or three minutes, the cleanliness can also reach high standards. In addition, ultrasonic cleaning machine also has good cleaning effects, speed, saving solvent, heat, workplace and labor, and other advantages.

The internal cleaning steps of the ultrasonic cleaner are as follows.

1. Disconnect and empty the liquid: Turn off the power supply of the ultrasonic cleaner, and empty all the liquid in the cleaning tank.
2. Disassembly cleaning: cleaning tank parts, such as ultrasonic transducer, acoustic head, etc., disassembled. Use water and the appropriate cleaning agent for cleaning. Be careful not to use too intense a cleaning method, so as not to damage the internal parts.
3. Clean the tank: use a soft damp cloth to wipe the inside of the cleaning tank, be careful not to use too rough a cloth or detergent containing chemicals, so as not to cause corrosion.
4. Check and clean the drain: If the ultrasonic cleaner has a drain, check and clean it regularly. You can use vinegar or disinfectant to remove the odor in the drain.
5. Re-assembly: After cleaning, the disassembled parts and components are reinstalled back to ensure that the installation is correct.
6. Regular inspection and maintenance: To ensure the normal operation and service life of the ultrasonic cleaner, it is recommended to carry out regular internal inspection and maintenance. For example, check whether the wires and plugs are intact, clean and lubricate the moving parts, and check whether there is any leakage or damage.

For the maintenance of the ultrasonic cleaning machine, the main need is to focus on the following aspects.

1. Keep clean: in the daily use of the process, regularly clean the tank and internal parts. Cleaning to use the appropriate cleaning agent, avoid the use of too rough cloth or containing corrosive substances of the cleaning agent. After cleaning, ensure that the thoroughly rinsed, and parts dry.
2. Check the power supply and wire: regularly check the power cord and plug is intact, if broken or aging should be replaced promptly. At the same time, we should also ensure that the use of power is in line with the specifications of the equipment.
3. Check the operation: in the process of use, we should regularly observe the operation of the cleaning machine, such as abnormal sound or vibration, water leakage, and other issues, which should be promptly shut down to check and repair.
4. Regular replacement parts: some fragile parts, such as ultrasonic cleaner nozzle, filter, etc., are to be replaced regularly. Replacement should use the original parts or reliable quality parts, to avoid the use of low-quality parts to affect the cleaning effect and service life.