Blog

The thickness of the coating has an important influence on the quality of the color-coated board. In order to ensure the consistency of coating quality, coating thickness gauge must be used for thickness detection. ATO coating thickness gauge can quickly and accurately test a variety of coating thickness, with minor measurement errors and high reliability. ​How to measure the thickness of a color-coated board with a coating thickness gauge?

Magnetic stirrer is a very common instrument in experimental equipment. No matter what kind of instrument is used, there will be many different problems. So how to effectively avoid the problems in the use of magnetic stirrer? The magnetic stirrer is suitable for stirring or heating and stirring at the same time. It is suitable for liquid or solid-liquid mixture with low viscosity.

Industrial water chiller typically comes as a complete package of closed-loop systems, including chiller, condenser and circulating pump, expansion valve, no flow shut-off, internal cold water tank, and temperature control station. Air-cooled water chiller in ATO automation is suitable for mold cooling, reducing product molding cycle, and can also be used for equipment cooling to maintain normal temperature. It is also suitable for other industries that require cooling. In this atticle, we will introduce the worling principle of industrial air-cooled water chiller.

A thickness gauge is an instrument used to measure the thickness of an object. It is often used in industrial production to continuously measure the thickness of products, such as steel plates, steel strips, paper, etc. The coating thickness gauge can measure the thickness of non-magnetic coatings on magnetic metal substrates, chrome, copper, enamel, rubber, paint, etc., and the thickness of non-conductive coatings on non-magnetic metal substrates, such as: enamel, rubber, paint , plastic, etc.

Water chiller is a kind of water cooling equipment, is able to provide constant temperature, constant current, constant pressure cooling equipment. In addition to knowing what a chiller is and how to use it, we also need to know how to maintain a chiller. As long as the equipment is maintained regularly according to the instructions, the normal operation of the equipment can be ensured. In this article, we will introduce water chiller maintenance in detail.

Ceramic capacitors use ceramic materials with high dielectric constant and low loss as the medium. The silver layer is sprayed on both sides of the ceramic substrate, and then the silver film is fired at high temperature as electrodes to weld the leads. The outer surface is coated with protective enamel or encapsulated with epoxy resin. The capacity is determined by the area and thickness of the ceramic sheet, and the pressure resistance is determined by the thickness of the ceramic.

The concept of the slurry pump and mud pump is very close, many people do not know what the difference is. Although both mud pump and slurry pump are impurity pumps, if you fully understand these two types of pumps, you can clearly distinguish them from the application and the characteristics of the conveying medium. In this article, we will introduce the differences between mud pump and slurry pump from 4 aspects.

A mud pump is an essential piece of equipment for any oil and gas well. They are used to move drilling mud and other fluids needed during the drilling process. To choose the right mud pump for your well, you need to know an overview of mud pumps, such as what is a mud pump, what types and advantages are there. In this article, we will explain in detail about the mud pump. By the end of this article, you will clearly understand mud pump.

In the AC multi-stage amplifier circuit, due to the different gain and power of each level, the DC working offset value of each level is different. If the direct coupling between the stages will make the working offset value of each level mixed and cannot work normally. The AC and DC isolation feature not only solves the coupling of the inter-stage communication, but also isolates the inter-stage bias value from mixing.

1. How to choose the single-phase isolation transformer's capability?

1) Principle of selecting single-phase transformer capacity

Reducing the capacity of the equipment will help to alleviate the excessive line losses that currently exist in the 10kV distribution network when the power load is typical. The low-voltage distribution network's load can alter at any time, depending on the time of year, the season, etc. When developing a 10kV distribution network, a single three-mixed distribution transformer installation method is typically employed. This scheme can be customized with one or more single-phase distribution transformers. Determine the capacity demand of a single-phase isolation transformer based on the specific changes in electricity consumption load and the low-voltage grid's mode of operation, then select the transformer that is most appropriate for power delivery.

DIP switch, also known as dual in-line package switch, is an address switch for operation control, using the principle of 0/1 binary code. The DIP switch is mostly used in the program control board to control the conduction and disconnection of the performance circuit of the component. There are two pins on the upper and lower sides of the back corresponding to each key of the DIP switch. When the DIP switch is on the ON side, these two pins are connected, otherwise disconnect. The four keys are independent and unrelated to each other. These elements are mainly used for binary encoding.

Ultrasonic thickness gauges measure thickness according to the principle of ultrasonic pulse reflection. When the ultrasonic pulse emitted by the probe passes through the object to be measured and reaches the interface of the material, the pulse is reflected back to the probe, which is determined by accurately measuring the propagation time of the ultrasonic wave in the material. The thickness of the material being measured. This principle can be used to measure all kinds of materials that can make ultrasonic waves propagate inside them at a constant speed.

The performance, shelf life, and service life of all capacitors depends largely on the environmental conditions in which they are exposed. Not only must the relationship of a single environmental factor to the capacitor, but also the effect of different combinations of these environmental factors be considered. The main environmental factors that affect the performance and life of capacitors are ambient temperature, humidity, vibration, shock, acceleration and atmospheric pressure, etc. The impact of these single environmental factors is briefly discussed as follows.

Centrifugal pumps are currently utilized across a vast array of domestic and industrial processes. From supplying the water used in residential buildings to industrial applications like food, beverage, and chemical manufacturing, different types of centrifugal pumps are required to effectively meet pumping requirements. The centrifugal pumps can be classified based on many factors such as construction, design, application and industrial standards. Therefore, one centrifugal pump can be placed into different groups at the same time. In this article, we will introduce three classifications of centrifugal pumps.

The handheld distance meter is based on the use of electromagnetic wave science, optics, acoustics, and other principles and has a compact body, used for distance measurement instruments. Principle: The handheld distance meter shoots a very thin laser beam to the target when working, and the laser beam reflected from the target is received by the photoelectric element, and the timer determines the time from the emission to the reception of the laser beam to calculate the distance from the observer to the target.

Mud pump, refers to the drilling process to the drilling mud or water and other washing liquid machinery. The main components are volute, impeller, pump seat, pump case, support cylinder, motor seat, motor and other components. Impeller nut is cast iron, so corrosion resistance is good, and convenient processing technology. High quality vertical mud pumps with thick, solid shaft and copper motor can be provided in ATO shop. In this article, we will show the price list of vertical mud pump.

A water chiller is a machine that removes heat from a liquid coolant via a vapor-compression, adsorption refrigeration, or absorption refrigeration cycles. With the continuous development of chiller industry, more and more human beings begin to pay attention to the chiller industry, and industrial water chiller is becoming more and more important to human beings. Water chiller is mainly divided into air cooled water chiller and water cooled water chiller. In this article, we will introduce these two types of water chillers in ATO online shop.

Oscilloscopes is an important test tool in electronic engineering. Especially when we measure a repetitive waveform or high frequency signal, it has a great effect. However, beginners will have a question: analog oscilloscope or digital oscilloscope, which one is better? However, in most cases, you will find that digital oscilloscopes are more expensive than analog oscilloscopes. In this article, we mainly introduce the differences between analog and digital oscilloscope.

Visible spectrophotometer can perform quantitative measurement, DNA/protein test, total phosphorus and nitrogen test, heavy metal test, pesticide residue test, food safety test, thermal power generation metal ion test, etc. Widely used in food, medicine, electricity, biology Research, teaching and scientific research, chemistry and chemical industry, quality supervision, water quality and environmental protection and commodity inspection and other major fields.

ATO digital rotary torque sensor with LCD display has the capacity range from 0.1 Nm/0.3 Nm/1 Nm/5 Nm/10 Nm/300 Nm/1000 Nm to 10000 Nm. LCD display can show torque, speed and power value at the same time. This article shows you how to wire and set a torque sensor in Modbus mode via S484 interface as a walkthrough of one of the applications of ATO torque sensors.