Tag: what is

As the name suggests, a flow meter is a professional automatic measuring device whose primary function is to measure the flow of fluids. These fluids can be liquids, gases, steam, mixed slurries, solid dust, etc. The flow meter is also referred to as a flowmeter since it not only quantifies the liquid's flow but also measures its instantaneous flow and total accumulated volume. With high precision, extended lifespan, simple operation and maintenance, and other features. Mainly used in industrial processes, energy measurement, environmental protection engineering, transportation, biotechnology, scientific experiments, marine meteorology, rivers and lakes, and other fields.

A temperature and humidity sensor is a sensor device equipped with humidity sensitive and thermal elements, which can be used to measure temperature and humidity, some with on-site display, and some without on-site display. Temperature and humidity sensors are widely used in various fields of production and life due to their small size and stable performance.

A piston pump can be defined as a machine used to transfer liquid or compressed gas from one point to another. This is a positive displacement pump with a high pressure seal reciprocating with the piston. Plunger pumps are robust, efficient and versatile. Machining, drilling, etc. are just a few of the application areas where plunger pumps are used. Piston pumps are used to transport liquids or compressed gases. It is a hydraulic pump with stable performance and high efficiency. In this article, we will introduce the structure of piston pump.

As the popularity of ups inverters is on the rise, many homes are switching from traditional generators to home ups inverters. The cost of ups inverters is much lower than that of generators, and the switch still makes sense. People buy ups inverters for various reasons, and this is a good move. In this article, we will list 4 advantages of ups inverters. At the same time, ATO industrial automation will provide high quality ups inverters of various powers.

A power line filter is an electrical apparatus that efficiently filters that frequency in a power line as well as any other frequencies. The purpose of a power line filter is to access a power line filter in the power line and receive a power signal of a particular frequency or delete a power signal after a particular frequency.

It is a passive two-way network with the power supply at one end and the load at the other. As a result, it is an impedance adaptation network. Because of the characteristics of the power port's electromagnetic interference and design, power line filters are typically low-pass type, which is important for electronic products because electromagnetic noise causes interference from other equipment with electronic products.

Sewage pump is a pump and motor connected, and at the same time diving under the liquid pump products, sewage pump structure is compact, small footprint. Easy installation and maintenance, large sewage pumps are generally equipped with automatic coupling device can be automatically installed, installation and maintenance is quite convenient. Long continuous operation time. Because the pump and motor are coaxial, the shaft is short, and the rotating parts are light, the load on the bearing is relatively small, and the life of the pump is much longer than that of the general pump. In this article, we introduce four types of sewage pumps.

Gloss meter is an instrument used to measure the surface gloss of ceramics, paints, inks, plastics, marble, aluminum, hardware and other materials. High-precision gloss meters are classified into three types according to the angle, including high-gloss, medium-gloss and low-gloss. As a professional instrument for detecting the gloss of the external surface of objects, the gloss meter is widely used in chemical raw materials, paint manufacturing, aerospace industry, automobile industry, shipbuilding industry, electronic industry, electrical industry, IT communication, etc. Now we will talk about gloss meter application in several different areas.

Linear guide is used to support and guide the moving parts, in a given direction to do reciprocating linear motion. It consists of steel balls rolling infinitely between the slider and the guide rail so that the loaded platform can move linearly along the guide rail easily with high precision. Linear guide is a kind of high precision product, the requirements for each component are very high. Linear guide has many advantages, in this article, we will explain in detail.

Leakage currents present a possible risk to patients in the unique setting of a hospital, placing additional demands on the electrical design. Medical IT systems (medical isolation transformers, etc.) must be installed in particular in locations where patient safety is crucial, such as operating rooms, intensive care units, and cardiac operating rooms. These locations must also have a steady power supply for the medical equipment they house.

Medical isolation transformer has strong anti-interference ability, which can effectively eliminate the noise, clutter, high voltage, surge and so on on the power grid, so as to provide a high-quality electric environment for the customer's equipment.

What is the transformer?

The transformer is made up of an iron core (or magnetic core) and one or more windings of a coil. The primary winding of the coil, which is linked to the power source, is referred to as the primary coil, and the remaining windings are referred to as the secondary coil.The simplest iron core transformer consists of two coils with unequal numbers of turns mounted on the core and a core made of soft magnetic material.

The core's function is to make the magnetic coupling between the two coils stronger.The core is made of a laminated silicon steel sheet that has been coated; there is no electrical connection between the two coils, and the coils are wound using insulated copper (or aluminum) wire to reduce eddy currents and hysteresis losses in the iron. The primary coil (or primary coil) is the coil connected to the AC power source, and the secondary coil is the coil connected to the appliance (or secondary coil).

Electricity, which is immediately changed by the generators of hydroelectric power stations and power producing stations, is widely employed as an energy source in modern industrial businesses. Depending on the transmission distance, the electricity produced by the generators will be transmitted at various voltage levels, hence a special device known as a "control transformer" is required to modify the voltage. It is a conversion tool because, in daily life, the power of various control transformer models is not the same, and the voltage and current limit values used are also different. However, electricity is transmitted from the same location, but the value required for each region is different. As a result, our transformer was developed to address these issues.Here we will take you through the purpose of control transformers.

Ceramic capacitors use ceramic materials with high dielectric constant and low loss as the medium. The silver layer is sprayed on both sides of the ceramic substrate, and then the silver film is fired at high temperature as electrodes to weld the leads. The outer surface is coated with protective enamel or encapsulated with epoxy resin. The capacity is determined by the area and thickness of the ceramic sheet, and the pressure resistance is determined by the thickness of the ceramic.

Centrifugal pumps are currently utilized across a vast array of domestic and industrial processes. From supplying the water used in residential buildings to industrial applications like food, beverage, and chemical manufacturing, different types of centrifugal pumps are required to effectively meet pumping requirements. The centrifugal pumps can be classified based on many factors such as construction, design, application and industrial standards. Therefore, one centrifugal pump can be placed into different groups at the same time. In this article, we will introduce three classifications of centrifugal pumps.

A spectrophotometer is a measuring instrument that samples reflective or transmissive objects with discrete wavelengths. Due to the different molecular structures of different objects, the ability to absorb light of different wavelengths is also different. Therefore, each object has a specific absorption spectrum. A spectrophotometer separates each monochromatic light from a mixture of wavelengths and measures its intensity.

Digital oscilloscope has the unique advantages of waveform triggering, storage, display, measurement, waveform data analysis and processing, and its use is increasingly popular. It is an indispensable tool for designing, manufacturing and repairing electronic equipment. Digital oscilloscope generally support multi-level menu, can provide users with a variety of choices, a variety of analysis functions. Other oscilloscopes can provide storage for waveform storage and processing. In this article we are going to discuss about different types of digital oscilloscopes in detail.

A dehumidifier is a device that absorbs moisture from the air to reduce indoor humidity. It also lowers the air temperature, making your room more comfortable. Which one you choose largely depends on where you live and what your budget is. If you want to keep the humidity in your home low, you need to choose the right house based on your living situation. This article mainly introduces the types of dehumidifiers.

Do you live in a hot or humid environment and have you noticed a lot of condensation on your windows and mirrors? Does anyone in your household suffer from allergies or asthma? Have you ever experienced mold in your room? If you are concerned about any of the above The answer to the question is yes, your home can benefit from a home dehumidifier. After the treated air is sucked in by the fan, it is first filtered by the air filter, and then cooled and dehumidified on the cooled evaporator. In this article we will talk about the benefits of dehumidifiers.

Spectrophotometer, also known as spectrometer, is a scientific instrument that decomposes light with complex components into spectral lines. The measurement range generally includes the visible light region with wavelengths ranging from 380 to 780 nm and the ultraviolet region with wavelengths ranging from 200 to 380 nm. Different light sources have their own unique emission spectrum, so different luminous bodies can be used as the light source of the instrument.

A colorimeter is an instrument that measures the color characteristics of materials. The main purpose of the colorimeter is to measure and analyze the color, hue and color value of the tested material. In order to overcome or reduce the misjudgment caused by stability, reduce the economic loss of users, and improve the efficiency of the colorimeter, it is necessary for us to analyze the main factors of insufficient stability of the colorimeter detected by the sample. In this article, we will go into details.

The ball valve is evolved from the plug valve. It has the same lifting action of rotating 90°, the difference is that the cock body is a sphere with a circular through hole or channel through its axis. The ratio of the spherical surface to the channel opening should be such that when the ball rotates 90°, all spherical surfaces should appear at the inlet and outlet, thereby truncating the flow. The ball valve can be closed tightly with only a 90° rotation operation and a small torque. The completely equal valve body cavity provides a low resistance, straight-through flow path for the medium.