140 watt 1-phase AC gear motor is a speed control electric motor, which designed to produce high torque, pinion shaft type or round shaft type for optional, different gear ratio to choose, the smaller reduction ratio, the higher gearbox output speed. Widely applicable for automatic machinery, small scale assembly line, food machinery, packaging machinery and more.
Specifications
Model |
ATO-6IK140R-AF |
ATO-6IK140R-EF |
ATO-6IK140R-CF |
ATO-6IK140R-HF |
Shaft Type |
Pinion shaft or Round shaft (Optional) |
Output Power |
140W |
Phase |
Single Phase |
Voltage |
100V |
110V |
120V |
220V |
230V |
220V |
230V |
Frequency |
50Hz |
60Hz |
60Hz |
50Hz |
60Hz |
Current |
2.7A |
3.0A |
1.8A |
1.95A |
1.05A |
1.15A |
1.05A |
1.15A |
Speed Control Range |
90-1350r/min |
90-1360r/min |
90-1650r/min |
90-1350r/min |
90-1650r/min |
Allowance Torque |
1200r/min |
830mN.m |
830mN.m |
830mN.m |
830mN.m |
90r/min |
420mN.m |
450mN.m |
420mN.m |
450mN.m |
Starting Torque |
620mN.m |
620mN.m |
620mN.m |
620mN.m |
Capacitor |
35μF |
25μF |
10μF |
10μF |
Weight |
Motor: 5.1kg, Gearhead: 2.1kg |
Gearbox Model |
6GU[]K |
Gear Ratio |
3, 3.6, 5, 6, 7.5, 9, 12.5, 15, 18, 25, 30, 36, 50, 60, 75, 90, 100, 120, 150, 180,200 Enter the gear ratio into the box ([]) within the model name |
Allowance Torque Unit: Upside (N.m) / Belowside (kgf.cm)
Model |
Gear Ratio |
3 |
3.6 |
5 |
6 |
7.5 |
9 |
12.5 |
15 |
18 |
25 |
30 |
36 |
50 |
60 |
75 |
90 |
100 |
120 |
150 |
180 |
200 |
Speed r/min |
50Hz |
500 |
417 |
300 |
250 |
200 |
166 |
120 |
100 |
83 |
60 |
50 |
41 |
30 |
25 |
20 |
16 |
15 |
12.5 |
10 |
8.3 |
7.5 |
60Hz |
600 |
500 |
360 |
300 |
240 |
200 |
144 |
120 |
100 |
72 |
60 |
50 |
36 |
30 |
24 |
20 |
18 |
15 |
12 |
10 |
9 |
ATO-6IK140R-AF ATO-6IK140R-EF ATO-6IK140R-CF ATO-6IK140R-HF |
Gearbox 6GU[]K |
50Hz |
2.6 |
3.1 |
4.4 |
5.2 |
5.2 |
6.6 |
9.9 |
11.8 |
14.2 |
17.8 |
21.4 |
25.7 |
35.6 |
40 |
40 |
40 |
40 |
40 |
40 |
40 |
40 |
26.5 |
31.6 |
44.8 |
53.0 |
53.0 |
80.6 |
101 |
120 |
144 |
181 |
218 |
262 |
263 |
400 |
400 |
400 |
400 |
400 |
400 |
400 |
400 |
60Hz |
2.1 |
2.5 |
3.5 |
4.2 |
4.2 |
6.3 |
7.9 |
9.5 |
11.4 |
14.4 |
17.2 |
20.7 |
28.7 |
34.5 |
40 |
40 |
40 |
40 |
40 |
40 |
40 |
21.4 |
25.5 |
35.7 |
42.8 |
42.8 |
64.2 |
80.6 |
96.9 |
116 |
147 |
175 |
211 |
292 |
352 |
400 |
400 |
400 |
400 |
400 |
400 |
400 |
Gear Motor Dimension (Unit: mm)
(Note: L1=72mm)
Keyway Dimension of Gearhead (Unit: mm)
Shaft Section Dimension of Round Shaft Type (Unit: mm)
(Note: For the round shaft type gear motor, the shape are the same as those of the pinion shaft type except the shaft section)
Speed Controller Dimension (Unit: mm)
Wiring Diagram
Details
Tips: Why you need a speed control AC gear motor?
- The addition of a gear motor can reduce the moment of inertia. Generally, the square of the speed ratio is reduced, and the start, stop, and speed can be controlled in time.
- Increasing the torque through the speed control AC gear motor is equivalent to increasing the input power, which can reduce the power required by the input motor (where speed adjustment is required). Generally, the motor is expensive, so consider using a gear motor.
- The geared motor has the function of protecting the motor in the transmission. During operation, the geared motor bears a large amount of torque. Only the overloaded amount divided by the reduction ratio is transmitted to the motor during overload. If it is directly borne by the motor, the motor may be damaged.
- When the speed control AC gear motor is overloaded, the gearboxis damaged first, and the gearbox can be restored to use only by replacing the spare parts. The cost is relatively low. If the motor is directly damaged, the repair is relatively slow and the cost is high.
- When the geared motor is directly connected to the load and runs at low speed, the motor will inevitably increase in order to meet the output torque current. This will inevitably have higher requirements for the heat dissipation and insulation of the motor. It is also not desirable from the perspective of energy saving. A speed control gear motor can reduce the impact of these problems.