Vibration motor is on both ends of the rotor shaft installed a set of adjustable eccentric block, the centrifugal force generated by high speed rotation shaft and eccentric block vibration force. ATO has AC vibration motor, DC brushless vibration motor and explosion proof vibration motor, power can be selected from 10W, 50W, 100W to 5.5 kW, 3000rpm-7000rpm rated speed. DC brushless vibration motor with speed dispaly controller, ATO vibration motor have high efficiency, energy saving, stable running and long service life. Special voltage, speed, power please contact us, can be customized.
Due to the good use of vibration motors in material classification and processing, vibration motors are constantly being introduced in industries such as mining, metallurgy, chemical industry and building materials. However, many users do not know how to adjust the vibration motor when using vibration motors. Based on years of production experience, we summarizes the following 3 methods to adjust the vibration of vibration motor.
Speed of vibration motor
Vibration motor is the power source of vibration mechanical equipment. It has high speed and small amplitude. Therefore, according to the different purposes of vibration, we first select the speed of the motor: The rotation speed of AC vibration motor at the frequency of 50 Hz is 3000 rpm/ min (2 poles), 1450rpm / min (4 poles) and 980 rpm / min (6 poles), and the rotation speed of DC vibration motor is 3000-7200 RMP / min. They produce double amplitudes: 2-4mm for 2-pole motors, 4-6mm for 4-pole motors, and 6-12mm for 6-pole motors.
Design form of vibration motor & Quantity required
Weight of vibrating mechanical equipment
Usage condition
The exciting force of motor should be reduced in high altitude area, or the VFD should be installed to control. That is to say, the exciting force of the vibrating motor should be adjusted at 50%.
Vibration motor is a power source and vibration source combined as one of the exciting source. Its exciting force is easy to use. They can be applied to general vibration machinery, such as: vibration crusher, vibrating screen extension machine, vibration baler, vibration shakeout machine, vibration molding machine, vibration pile driver, vibration hoist, vibration filling machine, silo vibration arch broken anti-occlusion device and so on. They are widely used in hydropower construction, thermal power generation, construction, building materials, chemical industry, mining, coal, metallurgy, light industry and other industrial sectors. Watch the following video to learn more about how to use a vibration motor.
The vibration motor is equipped with a set of adjustable eccentric blocks at both ends of the rotor shaft, and the centrifugal force generated by the high-speed rotation of the shaft and the eccentric block is used to obtain the exciting force. The vibration motor has a wide frequency range. Only by properly matching the excitation force and power can the mechanical noise be reduced.
The vibration motor is the core part of the vibration screening equipment. The excitation source combines the power source and the vibration source. It is a set of adjustable eccentric blocks installed at both ends of the rotor shaft. It will use the centrifugal force generated by the high-speed rotation of the shaft and the eccentric block to obtain the exciting force. In addition, the vibration motor has a high utilization rate of excitation force, low energy consumption, low noise and long life. The excitation force of the vibration motor can be adjusted steplessly and is easy to use.
1. Change the phase angle of the weight above and below the vibration motor, which can change the trajectory and residence time of the material on the screen, so that the screen machine can adapt to the required separation state of various materials. Various changes such as separation efficiency and network speed should be adjusted to a better state.
2. The upper weight cannot be adjusted. At this time, it is firstly required to open the adjustment hole at the bottom of the device base, and then loosen the lower weight fixing bolt. According to the trajectory of the screened material, it is required to adjust the phase angle of the upper and lower weights in the direction opposite to the discharge port. Then, please tighten the fixing bolts, put a small amount of material on the surface of the screen, let the screen run, and check the movement track of the material on the surface of the screen. If the processing parameters achieve good results, please stop fixing the bolts and stop adjusting (remember to tighten the fixing bolt).
3. Adjust additional weights: There are additional weights on the sides of the upper and lower weights, and their role is to increase or decrease the exciting force of the screen. You can increase or decrease other weights based on factors such as the number of layers in the device, the weight of the material, and so on. Non-professionals should not add or subtract extra weight at will.
If the motor does not work after startup, it should be checked:
After starting up, the motor is noisy and hot, it should be checked:
When you adjust the eccentric block, you should check whether the eccentric blocks at both ends of the shaft are adjusted symmetrically if the amplitude changes abnormally.
In the vibration equipment with two vibration motors working at the same time, when the phase rotation does not meet the requirements, the phase sequence of one vibration motor must be adjusted, not the phase sequence of the total power supply of the two vibration motors.
Filter by:
Clear All