3 kVA 50 kV AC DC Hipot Tester

5 out of 5 based on 1 reviews | Write a review

$2,448.95

High voltage AC/DC hipot tester, capacity is 3 kVA, high voltage 50 kV, 50 Hz or 60 Hz, dry type transformer tester, with LCD display control box, withstand voltage tester can be used to pressure test of polyethylene insulated power cable. Special capacity can be customized.

Input Voltage (V) *
DC Meter *

SKU: ATO-HTGTB-350

Qty:

30-day Returns

Delivery date: 6-12 days

Overview
Hipot Tester User Manual
Related Video

3 kVA hipot tester with a digital display control box, single phase, output 50 kV, dry type testing transformer, it is very convenient, flexible and high efficiency, factory direct sales.

Note: AC leakage current meter is not provided.

Specifications

Model	ATO-HTGTB-350
Capacity	3 kVA
Input Voltage	110V/ 120V/ 220V
Frequency	50Hz/ 60Hz
Output Voltage	50 kV
Current	60 mA
DC Output	70 kV
Phase	1 Phase
Weight (Transformer + Control Box)	48 kg
Cooling Method	Dry
Effeciency	90%
Impedance Voltage	<12%
Surface Temperature Raising	< 55°C
No Load Current	< 4%
Output Voltage Waveform	Sine Wave
Usage	AC DC Hipot Tester
Warranty	12 Months
Temperature Environment	0~40°C
Altitude	<2000m
Relative Humidity	<85%

Packing List

NO.	Description	Quantity
1	Hipot Test Set (1 Control Box + 3 kVA Dry Transformer)	1
2	Power Supply Cable	1
3	Earth Cable	1
4	Connecting Line	1
5	Fuse	3
6	Rectifying Diode	1
7	User Manual	1

Wiring Diagram

Tips: What is AC Hipot test?

AC hipot test is the most effective and direct method to identify the insulation strength of power equipment, and it is an important part of preventive test. In addition, since the AC hipot test voltage is generally higher than the operating voltage, the equipment has a large safety margin after the test, so the AC withstand voltage test is an important means to ensure the safe operation of power equipment.

Automatic hipot test user manual.pdf

Manual hipot test user manual.pdf

The video will show you how to connect ATO AC DC Hipot Tester.

</p>

Existing reviews of 3 kVA 50 kV AC DC Hipot Tester

How can I measure the leakage current?

I want your Hipot Tester to measure the leakage current, where can I measure it? What should I do?

From: Raymond | Date: 09/04/2020

Was this review helpful? Yes No (0/0)

ATO Responded

Yes, sure if you want to measure the leakage current, then it should be on high voltage side and in this case, we shall send you Hipot Tester with milli Amps meter.

Load more reviews...

Write your review for 3 kVA 50 kV AC DC Hipot Tester